Rearend removal

From Crankshaft Coalition Wiki

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-==Basic Steps to Removing a Rearend==
-#loosen wheel lugnuts while vehicle is on the ground
-#raise and support the body using blocks or something sturdie than jackstands make sure the rear wheels come off the ground
-#remove wheels
-#remove brake lines
-#remove straps or c clips from rear u joint and remove
-#loosen and remove control arms or leaf springs while using a jack under the rear end to rail and lower the rear end making the job easier and safer
-#when everything is removed and rear end rests on the jack alone lower rear end and remove it from under the vehicle if you have coil springs they will most likely fall out at this point

Latest revision as of 07:42, 18 January 2025