Rearend removal

From Crankshaft Coalition Wiki

Jump to: navigation, search

@@ Line 1: / Line 1: @@
- How to safely remove a rear end.
-#While vehicle is on the ground, loosen lug nuts.
-#Raise and support the vehicle body using jack stands, wood blocks or a similar sturdy support under the frame. Make sure the rear wheels are off the ground when the vehicle is at rest on the jack stands.
-#Remove wheels.
-#Loosen and/or remove brake lines.
-#Remove straps or c-clips from rear U-joint, and remove drive shaft. If the transmission tail housing is still lower than level fluid can leak out if the drive shaft yoke is removed. One can leave the drive shaft yoke in the transmission and secure the drive shaft up and out of the way.
-#Loosen and remove control arms or leaf springs while using a jack under the rear end to rail and lower the rear end making the job easier and safer.
-#When everything is removed, and the rear end rests on the jack alone, lower rear end and remove it from under the vehicle. If you have coil springs they will most likely fall out at this point.

Latest revision as of 07:42, 18 January 2025