Rust
(→References) |
(→What to apply to sandblasted steel prior to priming, to kill unseen rust) |
||
| Line 406: | Line 406: | ||
#Scrub metal to a clean, bright finish. Wipe dry with paper towels, and let flash dry completely. | #Scrub metal to a clean, bright finish. Wipe dry with paper towels, and let flash dry completely. | ||
#Scuff dry panel with dry scuff pad, wipe with wax and grease remover until clean and dry; when wiped with a clean towel, it comes back up clean. | #Scuff dry panel with dry scuff pad, wipe with wax and grease remover until clean and dry; when wiped with a clean towel, it comes back up clean. | ||
| + | |||
| + | |||
| + | ===Treating light body rust (from storing panels) prior to epoxy=== | ||
| + | Sand with 80 grit, wash with wax and grease remover. Use waterborne wax and grease remover, instead of solvent-borne (research exactly what that means), let set 15-30 minutes. Dry with a blower and a tack rag. Spray epoxy. | ||
===Cosmoline=== | ===Cosmoline=== | ||
Your Privacy Choices