Window removal and installation

Jump to: navigation, search
(Rubber seal type)
(Side window)
Line 61: Line 61:
  
 
===Side window===
 
===Side window===
On some vehicles the side windsheild is bolted or clipped to the track assembly. On other vehicles there are rivets holding it in place. In either case one must either remove bolts or clips or carefully drill out the rivets in order to remove a side window. Then quite often the track assembly has an upper limiter which must be removed to allow removal of the side window
+
On some vehicles the side windshield is bolted or clipped to the track assembly. On other vehicles there are rivets holding it in place. In either case one must either remove bolts or clips or carefully drill out the rivets in order to remove a side window. Then quite often the track assembly has an upper limiter which must be removed to allow removal of the side window
 
----
 
----
  

Revision as of 17:49, 9 August 2007

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox