Hopping up the 500 Cadillac
(New page: The 500 Cadillac engine is finally finished and Dyno’d. Many things were learned about what to use, what works and what doesn’t after MANY DYNO pulls. 1. The crankshaft can be offset...) |
Cadillac 1 (Talk | contribs) |
||
| Line 11: | Line 11: | ||
1968-1972 small chamber heads if they are fitted with 2.19-1.84 chevy valves. Small chamber heads | 1968-1972 small chamber heads if they are fitted with 2.19-1.84 chevy valves. Small chamber heads | ||
With big valves and bowl work are worth 25 hp over large chamber heads with big valves & bowl work. | With big valves and bowl work are worth 25 hp over large chamber heads with big valves & bowl work. | ||
| − | 4. | + | 4.The BEST heads to use are the NEW Aluminum ones from MTS. When these are Fully Ported by an |
` experienced head porter (like BPE) they are worth about 100 horsepower over a stock head of any type. | ` experienced head porter (like BPE) they are worth about 100 horsepower over a stock head of any type. | ||
4. The Edlebrock intake works good on a 500 inch or smaller motor if you don’t exceed 4500 rpm. | 4. The Edlebrock intake works good on a 500 inch or smaller motor if you don’t exceed 4500 rpm. | ||
Your Privacy Choices