Rearend identification
(→8.5" non C-clip rearend) |
(→U-joints) |
||
| Line 338: | Line 338: | ||
==U-joints== | ==U-joints== | ||
| − | *1310 series, (aka "small Chevy") has 1.063" diameter caps, 3.219" measured across to lock ring points (1-1/16" x 3-7/32"), uses outside clips. Was OEM for many 1967-74 GM cars.<br> | + | *1310 series, (aka "small Chevy") has 1.063" diameter caps, 3.219" measured across to lock ring points (1-1/16" x 3-7/32"), uses outside clips. Was OEM for many 1967-74 GM cars. Also used with Ford F100s (including early F150s prior to 1980), Broncos, Econolines with 9 inch differentials and American Motors/Jeep products (pinion to driveshaft location)<br> |
{{Note1}}There's also a 1310 "special" U-joint, which has two 1-1/16" and two 1-1/8" caps. Used OE on some Fords and used as an adapter U-joint. | {{Note1}}There's also a 1310 "special" U-joint, which has two 1-1/16" and two 1-1/8" caps. Used OE on some Fords and used as an adapter U-joint. | ||
*1330 series pinion yokes use locating tabs to center the U-joint, has 1.063" diameter caps, 3.625" measured across to lock ring points (1-1/16" x 3-5/8"), uses outside clips. Used on heavy-duty/high performance/big engine applications. | *1330 series pinion yokes use locating tabs to center the U-joint, has 1.063" diameter caps, 3.625" measured across to lock ring points (1-1/16" x 3-5/8"), uses outside clips. Used on heavy-duty/high performance/big engine applications. | ||
Your Privacy Choices