John Deere Blitz Black paint

Jump to: navigation, search

@@ Line 10: / Line 10: @@
 http://www.nj.com/forums/profile.ssf?nickname=nudeyoga nude yoga
-==Application==
+http://www.nj.com/forums/profile.ssf?nickname=nudeblacks6 nude blacks
-#If the existing paint isn't peeling or doesn't have large amounts of rust, then no primer is necessary. Sand with extra fine grit sand paper, wipe with a clean cloth and apply JDBB paint.
+http://www.nj.com/forums/profile.ssf?nickname=tiffanypol8 tiffany pollard nude photos
-#For spraying with an HVLP gun, use a 1.4 or 1.5 tip.
+http://www.nj.com/forums/profile.ssf?nickname=nudehiking nude hiking
-#If a primer is needed, JDBB primer is recommended (it's available in spray cans, quarts, and gallons). Wait 36 hours after applying primer to apply paint.
+http://www.nj.com/forums/profile.ssf?nickname=freenudece1 free nude celebs
-#John Deere thinner is needed, at a mix ratio of 8 parts JDBB paint:1 part John Deere thinner.
+http://www.nj.com/forums/profile.ssf?nickname=preteennud0 preteen nude
-#For faster-drying and harder paint, John Deere hardener can be used. It's available in pints. When using the hardener, the mix ratio is 8 parts JDBB paint:1 part John Deere thinner:1 part John Deere hardener.
+http://www.nj.com/forums/profile.ssf?nickname=volleyball0 volleyball nude
-#Spray one light tack coat, wait 10-15 minutes, then shoot the full wet coat.
+http://www.nj.com/forums/profile.ssf?nickname=carmenelec7 carmen electra nude
-#Wait no longer than 3 hours to apply a second coat. However, one coat with the 8:1:1 paint-thinner-hardener ratio should be adequate.
+http://www.nj.com/forums/profile.ssf?nickname=annehathaw9 anne hathaway nude
-#A gallon will easily cover a small car.
+http://www.nj.com/forums/profile.ssf?nickname=nudemodels nude models
 ==Can you paint over John Deere Blitz Black paint?==

John Deere Blitz Black paint

Revision as of 12:26, 12 October 2008

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

Toolbox