John Deere Blitz Black paint

Jump to: navigation, search
(Summary)
(Application)
Line 7: Line 7:
 
http://www.nj.com/forums/profile.ssf?nickname=hannahmont6 hannah montana naked
 
http://www.nj.com/forums/profile.ssf?nickname=hannahmont6 hannah montana naked
  
==Application==
+
http://www.nj.com/forums/profile.ssf?nickname=ashleytisd4 ashley tisdale naked
#If the existing paint isn't peeling or doesn't have large amounts of rust, then no primer is necessary. Sand with extra fine grit sand paper, wipe with a clean cloth and apply JDBB paint.
+
http://www.nj.com/forums/profile.ssf?nickname=tilatequil85 tila tequila naked
#For spraying with an HVLP gun, use a 1.4 or 1.5 tip.
+
http://www.nj.com/forums/profile.ssf?nickname=nakedmen naked men
#If a primer is needed, JDBB primer is recommended (it's available in spray cans, quarts, and gallons). Wait 36 hours after applying primer to apply paint.
+
http://www.nj.com/forums/profile.ssf?nickname=zacefronna8 zac efron naked
#John Deere thinner is needed, at a mix ratio of 8 parts JDBB paint:1 part John Deere thinner.
+
http://www.nj.com/forums/profile.ssf?nickname=nakedceleb8 naked celebrities
#For faster-drying and harder paint, John Deere hardener can be used. It's available in pints. When using the hardener, the mix ratio is 8 parts JDBB paint:1 part John Deere thinner:1 part John Deere hardener.
+
#Spray one light tack coat, wait 10-15 minutes, then shoot the full wet coat.
+
#Wait no longer than 3 hours to apply a second coat. However, one coat with the 8:1:1 paint-thinner-hardener ratio should be adequate.
+
#A gallon will easily cover a small car.
+
  
 
==Can you paint over John Deere Blitz Black paint?==
 
==Can you paint over John Deere Blitz Black paint?==

Revision as of 16:24, 12 October 2008

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox