Media blasting

Jump to: navigation, search

@@ Line 63: / Line 63: @@
 ==Safety==
-*If you're getting media outside of the cabinet, you'll need to wear a mask.
-*The blast media can be slippery on a hard surface.
+The BARE MINIMUM when doing open-air blasting is-
+(for when you first start off)
+*Long pants and sleeves
+*Fully enclosed shoes (remembr to put your socks over you pants!)
+*A facemask with safety goggles worn underneath
+*Leather Gloves (media dosnt feel the gretest on your hands when coming out at 100PSI+)
+*Respirator (NOT a cheap paper one, the cartridge-type is the one you want)
+MUCH BETTER PROTECTION-
+(when you gain experience/work-load,size)
+*Full coveralls
+*Full blasting mask
+*Long leather gauntlet-type welder' gloves
+*Leather work boots (must be over ankles)
 ==Resource dump==

Revision as of 11:33, 15 October 2008