Calculating tire dimensions
From Crankshaft Coalition Wiki
(New page: Width x Aspect Ratio = Section Height Section Height x 2 = Combined Section Height Combined Section Height + Wheel Diameter = Tire Diameter Image:Tire_dimen.gif Example: 185/60R...) |
|||
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | ==Formulas== | ||
| + | *Width x Aspect Ratio = Section Height | ||
| + | *Section Height x 2 = Combined Section Height | ||
| + | *Combined Section Height + Wheel Diameter = Tire Diameter | ||
| + | ==Tire dimensions== | ||
| + | [[Image:Tire_dimen.gif|400px]] | ||
| + | ==Using the formulas== | ||
Example: 185/60R14 85H or 185/60HR14 | Example: 185/60R14 85H or 185/60HR14 | ||
| Line 13: | Line 15: | ||
222mm + 355.6mm(14")= 577.6mm or 22.74" | 222mm + 355.6mm(14")= 577.6mm or 22.74" | ||
| − | The first number is the width of the tire in millimeters, measured from sidewall to sidewall. To convert to inches, divide by 25.4 In the example above, the width is | + | The first number is the width of the tire in millimeters, measured from sidewall to sidewall. To convert to inches, divide by 25.4 In the example above, the width is 185 mm or 7.28". |
The second number is the aspect ratio. This is a ratio of sidewall height to width. In the example above, the tire is 7.28" wide, multiply that by the aspect ratio to find the height of one sidewall. In this case, 185x0.60=111mm or 7.28"x0.60=4.36". | The second number is the aspect ratio. This is a ratio of sidewall height to width. In the example above, the tire is 7.28" wide, multiply that by the aspect ratio to find the height of one sidewall. In this case, 185x0.60=111mm or 7.28"x0.60=4.36". | ||
| Line 20: | Line 22: | ||
To figure the outside diameter of a tire, take the sidewall height and multiply by 2,(remember that the diameter is made up of 2 sidewalls, the one above the wheel, and the one below the wheel) and add the diameter of the wheel to get your answer. | To figure the outside diameter of a tire, take the sidewall height and multiply by 2,(remember that the diameter is made up of 2 sidewalls, the one above the wheel, and the one below the wheel) and add the diameter of the wheel to get your answer. | ||
| + | |||
| + | While this should be the exact diameter, the actual diameter can vary from this due to tire pressure, manufacturing tolerances, etc. So the only way to know the exact diameter is to physically measuring it. This can be done by stretching a string around the tire then measure the length of the string, or by marking the tire and the surface it's sitting on at the contact point, then rotate the tire several times. Measure the distance and divide by the number of rotations. Making more than one rotation lessens the chance of an error. | ||
| + | |||
| + | ==Tire size calculator== | ||
| + | *[http://www.1010tires.com/TireSizeCalculator.asp Tire Size Calculator], you can compare up to four different sizes of tires. | ||
| + | |||
| + | [[Category:Tires]] | ||
Your Privacy Choices