Patching a body panel
From Crankshaft Coalition Wiki
| Line 1: | Line 1: | ||
| − | |||
== Patch panels == | == Patch panels == | ||
| Line 19: | Line 18: | ||
#Metal finish the area, use paint or large marker over area, block sand to find high/low spots. Hammer and dolly until there's little left. | #Metal finish the area, use paint or large marker over area, block sand to find high/low spots. Hammer and dolly until there's little left. | ||
#For best results use a shrinking disk on the imperfections, or use [[bondo]]. | #For best results use a shrinking disk on the imperfections, or use [[bondo]]. | ||
| − | |||
| − | |||
| − | |||
| − | |||
Your Privacy Choices