Metal shaping
From Crankshaft Coalition Wiki
m (→Hammer forms) |
m (Reverted edits by 168.169.226.3 (talk) to last revision by Cobalt327) |
||
| Line 76: | Line 76: | ||
In the photos below, high density polyethylene sheet was used along with a 1/8" thick steel plate. This panel could have been done on the bead roller but was done with a hammer form instead for a more accurate shape. The plate was used to achieve a nice defined edge. | In the photos below, high density polyethylene sheet was used along with a 1/8" thick steel plate. This panel could have been done on the bead roller but was done with a hammer form instead for a more accurate shape. The plate was used to achieve a nice defined edge. | ||
| + | |||
[[Image:IMG_3413_(Medium).jpg]] | [[Image:IMG_3413_(Medium).jpg]] | ||
Your Privacy Choices