Doug Nash transmission

From Crankshaft Coalition Wiki

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-I am building a '68 Camaro and I already have a 454 that is bored .060" over, an Eagle forged rotating assembly, a .540"/.540" Comp cam and hydraulic lifters, I have a Doug Nash 5 speed with a Long vertigate shifter. I have a Lakewood bellhousing and I've already purchased a Ram billet flywheel, Ram clutch, and a Ram pressure plate. The bearing surface for the throwout bearing on the tranny is about 1.37" OD. My question is what throwout bearing am I going to need to use? I've talked to the tech line at Summitt and they have no clue, I called Richmond and they were absolutely no help, and I just want to get this right, so if anybody can help me, I would really appreciate it.
-[[File:DOUG NASH 4plus1 RACE TRANS.jpg|thumb|left|350px|Doug Nash 4 plus 1 race tranny]] <br style="clear:both"/>
-[[Category:Transmission]]
-[[Category:Undeveloped articles]]

Latest revision as of 21:18, 25 July 2023