Talk:Hot rodding the HEI distributor

From Crankshaft Coalition Wiki
Jump to: navigation, search
(Blanked the page)
 
Line 1: Line 1:
{{Sign1}}
 
==Possible copyright/ownership conflict==
 
This appears to have been copy-pasted from here: http://67-72chevytrucks.com/vboard/showthread.php?t=88002 . Not sure if it's the original author that did the copy-pasting, in which case it would be OK. --[[User:Jon|Jon]] 15:57, 1 March 2007 (PST)
 
:I added credit for the thread where the article was taken.--[[User:Cobalt327|Cobalt327]] 07:54, 19 June 2012 (MDT)
 
  
==Photos for possible use==
 
 
[[File:HEI CAP- ELECTRODE- INSULATOR- COIL DIAGRAM.jpg|200px]]
 
[[File:HEI MAGNETIC PICK UP COIL V6 EVEN FIRE.jpg|200px]]
 
[[File:HEI COIL DATA RATIO WINDS ETC.jpg|500px]]
 
[[File:DIST THRUST BEARING-SPACER 003.jpg|200px]]
 
[[File:ROTOR where weights hit2.jpg|200px]]
 
[[File:HEIadvlimitlock2.jpg|500px]]
 
[[File:Hei mechanical ADVANCEslots and pins 0011.jpg|200px]]
 
 
==Opinion on [http://www.crankshaftcoalition.com/wiki/Hot_rodding_the_HEI_distributor#What_vacuum_source_should_I_use-_manifold_or_ported.3F Cliff Ruggles' vacuum advance advice]==
 
Note: Cliff is missing the essential point here. This is not about what some enegine "likes" or not but pure simple science. The whole idea with adding vacum-advance is to compensate for the fact that the thinner idle/cruise-mixture are burning slower, meaning it will need an earlier spark or more timing-advance to burn properly. A properly set full manifoil vacum will also prevent detonation since it goes off as soon as the enegine starts working/loosing vacum.--[[193.71.29.173|193.71.29.173]] 05:52, July 1, 2012‎
 
 
:You need to realize that at idle the engine is running off of the idle circuit. If the idle circuit is correctly calibrated, there is no need for extra advance. The added advance from the vacuum advance using manifold vacuum is a help when a larger cam is used that has less idle vacuum.
 
 
:Under cruise conditions it makes absolutely '''NO difference''' what the vacuum source is for the vacuum advance.--[[User:Cobalt327|Cobalt327]] 18:48, 1 July 2012 (MDT)
 

Latest revision as of 13:34, 26 November 2023

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox