Troubleshooting electrical problems

From Crankshaft Coalition Wiki
Jump to: navigation, search
(Add text, image, links)
 
Line 3: Line 3:
  
 
==Cleaning terminals==
 
==Cleaning terminals==
Start at the battery. Regardless of how the connections look, remove the cables. Remove the positive cable first, then the negative cable. Use a battery terminal wire brush tool to clean the battery terminals and the cable terminals. Remove all old oxidized contaminants. Be aware that lead is likely present, so wear gloves if you are concerned about lead migrating through your skin.
+
Start at the battery. Regardless of how the connections look, remove the cables. Remove the negative cable first, then the positive cable. Removing them in the opposite order will cause arcing if there is any charge in the battery.  Use a battery terminal wire brush tool to clean the battery terminals and the cable terminals. Remove all old oxidized contaminants. Be aware that lead is likely present, so wear gloves if you are concerned about lead migrating through your skin.
  
 
To prevent future corrosion, a light coating of non-conducting grease such as Dow Corning DC4 should be applied. While a professional  might not recommend this, I had Japanese mechanics put regular bearing grease on my car battery terminals when I was overseas and it never presented a problem. It seemed to prevent acid build up and corrosion.
 
To prevent future corrosion, a light coating of non-conducting grease such as Dow Corning DC4 should be applied. While a professional  might not recommend this, I had Japanese mechanics put regular bearing grease on my car battery terminals when I was overseas and it never presented a problem. It seemed to prevent acid build up and corrosion.
Line 51: Line 51:
  
 
==Resources==
 
==Resources==
 +
*[http://www.danielsternlighting.com/home.html Daniel Stern's excellent page on headlight relays, voltage drop, etc.]
 +
*[http://www.archtoolbox.com/representation/abbreviations/99-electabbrev.html Electrical abbreviations] from archtoolbox.com
 
*[http://www.vernco.com/Sparks/id606.htm Voltage drop test]
 
*[http://www.vernco.com/Sparks/id606.htm Voltage drop test]
 +
 +
*Crankshaft Coalition wiki articles:
 +
**[[How to solder electrical connections]]
 +
**[[Understanding the math of electrical loads]]
 +
**[[Wiring diagrams]]
 +
**[[Remote Ford solenoid for GM- no hot start]]
 +
**[[Relay application guide]]
 +
**[[How to solder electrical connections]]
  
 
[[Category:Electrical]]
 
[[Category:Electrical]]
 
[[Category:Troubleshooting]]
 
[[Category:Troubleshooting]]
[[Category:Undeveloped articles]]
 
[[Category:Undeveloped Electrical articles]]
 

Latest revision as of 10:31, 25 August 2023

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox