1964-1990 Oldsmobile V8 engine information

From Crankshaft Coalition Wiki
Jump to: navigation, search
(Identification)
 
Line 3: Line 3:
  
 
==Introduction==
 
==Introduction==
In 1964, Oldsmobile came out with a new 330 cid small block engine. In 1965 the 400 and 425 cid big block engines were introduced. Over the years other displacements were added. The Olds 455 was introduced in 1968, it was developed from the Olds 425, which was a tall-deck version of the 330 engine design. Both of which replaced the 394 cid V-8, which was developed from the design introduced in 1949 as the 303 cid "Rocket" V-8. Production of big blocks ceased in 1976, although some were used (not necessarily in cars) in the 1977 model year. Production of small blocks ceased in 1990.
+
In 1964, Oldsmobile came out with a new 330 cid engine. In 1965 the 400 and 425 cid taller deck height engines were introduced. Over the years other displacements were added. The Olds 455 was introduced in 1968, it was developed from the Olds 425, which was a tall-deck version of the 330 engine design. Both of which replaced the 394 cid V-8, which was developed from the design introduced in 1949 as the 303 cid "Rocket" V-8. Production of tall deck blocks ceased in 1976, although some were used (not necessarily in cars) in the 1977 model year. Production of the Olds engine platform ceased in 1990.
  
The big and small block engine types are almost identical, with the big block having about a one inch higher deck than the small block. The bore centers are the same, the only differences between the small-block and big-block Olds blocks are the deck height (9.33" and 10.625", respectively) and the main journal size (2.5" and 3.0", respectively); the diesel 350 used the BB size mains, however. All small blocks have a 3.385" stroke; the displacement varied by increasing the bore size.
+
The tall deck and short deck engine types are almost identical, with the tall deck having about a one inch higher deck height than the short deck height blocks. The bore centers are the same, the only differences between the short deck and tall deck Olds blocks is the deck height (9.33" and 10.625", respectively) and the main journal size (2.5" and 3.0", respectively); the diesel 350 used the tall deck size mains, however. All short deck blocks have a 3.385" stroke; the displacement varied by increasing the bore size.
 
+
==Parts interchangeability==
+
Many internal parts interchange: flexplate and flywheel, engine mounts, oil pan, front cover, water pump, bellhousing (also interchanges with modern Cadillac, Buick and Pontiac), oil pump and pump driveshaft, rocker arms and fulcrum (except early 330), cam and lifters, harmonic balancer, cam bearings, timing chains and timing gears. Heads will basically interchange, except manifold ports may not align. Early engines used both 39 degree and 45 degree lifter angles along with two different lifter diameters. Because of these differences, cams and lifters will not exchange between engines with different angles and lifter diameters, obviously. In 1980 push rods were changed to a larger diameter tip, from 5/16" to 3/8". Because of this changes were needed to the rocker arms and lifter cups.
+
  
 
==Engine names==
 
==Engine names==
Line 14: Line 11:
 
[[File:1966-oldsmobile-442ultra high comp.jpg|left|thumb|300px|1966 442 Ultra High Compression]][[File:1969 ram rod 350.jpg|thumb|300px|1969 W-31 Ram Rod 350]][[File:1957j2 olds.jpg|thumb|left|300px|1957 J-2 Golden Rocket]][[File:1968 Hurst Olds 455.jpg|thumb|300px|1968 Hurst Olds W-30 455 Rocket]]  
 
[[File:1966-oldsmobile-442ultra high comp.jpg|left|thumb|300px|1966 442 Ultra High Compression]][[File:1969 ram rod 350.jpg|thumb|300px|1969 W-31 Ram Rod 350]][[File:1957j2 olds.jpg|thumb|left|300px|1957 J-2 Golden Rocket]][[File:1968 Hurst Olds 455.jpg|thumb|300px|1968 Hurst Olds W-30 455 Rocket]]  
 
<br style="clear:both"/>
 
<br style="clear:both"/>
 
Hello there,
 
 
My name is Aly and I would like to know if you would have any interest to have your website here at crankshaftcoalition.com promoted as a resource on our blog alychidesign.com ?
 
 
We are in the midst of updating our broken link resources to include current and up to date resources for our readers. Our resource links are manually approved allowing us to mark a link as a do-follow link as well
 
.
 
If you may be interested please in being included as a resource on our blog, please let me know.
 
 
Thanks,
 
Aly
 

Latest revision as of 19:25, 21 February 2020

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox