|
|
| Line 1: |
Line 1: |
| − | [http://www.henryherbert.com/the-mad-men-suit-be-as-dapper-as-draper Bespoke shirt] Article 3 10072014Staying sharpThere are a infininate of different ways you can keep your presence and your well tailored bespoke three piece suit looking smart, weather it is a general day to day keeping of a suit, or if you may be driving on public transport and want to remain pressed and a dandy gent, one general rule I have always followed is if you need to encase a custom suit in luggage and unfortunately they don't have a specialist suit travel holder what I choose do is turn my waist coat inside out, I then will carefully grab both jackets and bring them together, when I have done that I will roll the shirt very {carefully from top to bottom in a roll and then put between my clothes in my trunk. If you decide to choose this strategy whilst visiting long distance it is so important you follow these steps carefully, if you get it wrong not only will you find a very sad wrinkly garment when you reach your point of end but you will also daring breaking the full floating canvas on the inside on the jacket if you roll it too sadly or the wrong way. My next piece of advice would be for bespoke shirts, If you have a Henry Herbert that you want to swap and take with you on a long trip you again have a load of options, option number ten, carefully hold the bespoke waist coats sleeve evenly and symmetrically onto the back of the shirt, when you are satisfied they are symmetrical cut the bottom of the short across half the circumference and then once again, before sharpening the button you will have already made sure it is completely buttoned up, the reason for this is when the suit is completed you are now going to wind your trouser belt into a circle that will fit perfectly into the collar stand of the shirt, this is not only an ideal strategy to pack your luxury lifestyle before you drive but it will also stop the Tailored and its collar from collapsing or sadly causing ripping keep you from appearing unfortunately inferior to GQ Magazine or any happy Gentleman for that matter, and stay a dapper gent! Now we have talked about made to measure shirts and how we should travel without them but you might question if we are celebrating our suit for example whilst we travel and we get to the area and unfortunately have the inevitable smashing? No problem, if you can't find your local bespoke craftsman the shower room will do! Just hand the shirt up in a relatively private room with doors closed, sponge it side ways and run hot taps to create steam, here you go all cotton on the wedding shirt will have been tailored. Always make sure when you use this and tried and proven strategy that originated?began from Savile Row in London not to add any of the garments wet as this will be a added benefit, for a perfect finish and perfectly tailored looking shirt I would say no more than one to seven ticks of hot steaming, this should been more than ideal to do a wonderfull job.http://www.henryherbert.com
| + | |
Your Privacy Choices