Block deck height

From Crankshaft Coalition Wiki

Jump to: navigation, search

@@ Line 26: / Line 26: @@
 {{Note1}} Some dynamic compression ratio calculators (like KBs) ask for an additional 15 degrees of duration be added to the IVC @ 0.050" lift point figure. <br>
-{{Note1}}If the intake valve closing (IVC) point isn't known, it can be calculated:
+{{No
-# Divide the intake duration by 2
-# Add the results to the lobe separation angle (LSA)
-# Subtract any ground-in advance
-# Subtract 180
-This result does not need to have any amount added to the IVC point, like the KB calculator calls for.
-<br><br>
-[[Category:Engine]]
-[[Category:GM]]
-[[Category:Undeveloped articles]]
-[[Category:Undeveloped Engine articles]]

Latest revision as of 07:06, 8 January 2025