Finding vacuum leaks

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-{{youcanedit}}
+pikkzarelz http://www.livejournal.com/interests.bml?int=pikkzarelz
-There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
+<a href="http://www.livejournal.com/interests.bml?int=pikkzarelz">pikkzarelz</a>
+[url=http://www.livejournal.com/interests.bml?int=pikkzarelz]pikkzarelz[/url]
-=Propane method=
+[link=http://www.livejournal.com/interests.bml?int=pikkzarelz]pikkzarelz[/link]
+qdelplhmf http://cefalxjen.livejournal.com/752.html
-#Get a soldering propane tank and valve attachment.
+<a href="http://cefalxjen.livejournal.com/752.html">qdelplhmf</a>
-#Unscrew the end of it so you have a threaded pipe without the nozzle.
+[url=http://cefalxjen.livejournal.com/752.html]qdelplhmf[/url]
-#Attach a 2 foot piece of hose to the end.
+[link=http://cefalxjen.livejournal.com/752.html]qdelplhmf[/link]
-#Start the engine and let it warm up a bit.
+frfesofokrafu http://frfesofokrafu.livejournal.com
-#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
+<a href="http://frfesofokrafu.livejournal.com">frfesofokrafu</a>
-#If the engine smooths out or revs up a bit, you have found your leak.
+[url=http://frfesofokrafu.livejournal.com]frfesofokrafu[/url]
+[link=http://frfesofokrafu.livejournal.com]frfesofokrafu[/link]
-Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
+qashendronel http://olafeemenp.livejournal.com/523.html
+<a href="http://olafeemenp.livejournal.com/523.html">qashendronel</a>
-PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
+[url=http://olafeemenp.livejournal.com/523.html]qashendronel[/url]
+[link=http://olafeemenp.livejournal.com/523.html]qashendronel[/link]
-=Carburetor cleaner method=
+lipmennov http://www.livejournal.com/interests.bml?int=lipmennov
-#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
+<a href="http://www.livejournal.com/interests.bml?int=lipmennov">lipmennov</a>
-#Notice a change in the running of the engine and you might have found your leak.
+[url=http://www.livejournal.com/interests.bml?int=lipmennov]lipmennov[/url]
+[link=http://www.livejournal.com/interests.bml?int=lipmennov]lipmennov[/link]
-[[Category:Engine]]

Finding vacuum leaks

Revision as of 04:07, 22 April 2009

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

Toolbox