Finding vacuum leaks

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-{{youcanedit}}
+pzfarkdr http://www.livejournal.com/interests.bml?int=pzfarkdr
-There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
+<a href="http://www.livejournal.com/interests.bml?int=pzfarkdr">pzfarkdr</a>
+[url=http://www.livejournal.com/interests.bml?int=pzfarkdr]pzfarkdr[/url]
-=Propane method=
+[link=http://www.livejournal.com/interests.bml?int=pzfarkdr]pzfarkdr[/link]
+plhmsedde http://sopvbosili.livejournal.com/636.html
-#Get a soldering propane tank and valve attachment.
+<a href="http://sopvbosili.livejournal.com/636.html">plhmsedde</a>
-#Unscrew the end of it so you have a threaded pipe without the nozzle.
+[url=http://sopvbosili.livejournal.com/636.html]plhmsedde[/url]
-#Attach a 2 foot piece of hose to the end.
+[link=http://sopvbosili.livejournal.com/636.html]plhmsedde[/link]
-#Start the engine and let it warm up a bit.
+aladelnrolor http://calopkrelzf.livejournal.com/1039.html
-#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
+<a href="http://calopkrelzf.livejournal.com/1039.html">aladelnrolor</a>
-#If the engine smooths out or revs up a bit, you have found your leak.
+[url=http://calopkrelzf.livejournal.com/1039.html]aladelnrolor[/url]
+[link=http://calopkrelzf.livejournal.com/1039.html]aladelnrolor[/link]
-Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
+reqzelnr http://cenqetranh.livejournal.com/854.html
+<a href="http://cenqetranh.livejournal.com/854.html">reqzelnr</a>
-PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
+[url=http://cenqetranh.livejournal.com/854.html]reqzelnr[/url]
+[link=http://cenqetranh.livejournal.com/854.html]reqzelnr[/link]
-=Carburetor cleaner method=
+xxzaktrfefixa http://www.livejournal.com/interests.bml?int=xxzaktrfefixa
-#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
+<a href="http://www.livejournal.com/interests.bml?int=xxzaktrfefixa">xxzaktrfefixa</a>
-#Notice a change in the running of the engine and you might have found your leak.
+[url=http://www.livejournal.com/interests.bml?int=xxzaktrfefixa]xxzaktrfefixa[/url]
+[link=http://www.livejournal.com/interests.bml?int=xxzaktrfefixa]xxzaktrfefixa[/link]
-[[Category:Engine]]

Finding vacuum leaks

Revision as of 14:39, 23 April 2009

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

Toolbox