Freeing a stuck engine

Jump to: navigation, search
(Unsticking an engine in a manual transmission vehicle)
Line 63: Line 63:
 
Once the engine has soaked, jack up one drive wheel, put the transmission in high gear and work the wheel back and forth.
 
Once the engine has soaked, jack up one drive wheel, put the transmission in high gear and work the wheel back and forth.
  
If you have a friend to help you can skip jacking up the wheel, put the vehicle in high gear, position yourselves on each end of the vehicle and rock the vehicle back and forth (I prefer this method since it seems to me to be somewhat easier).
+
If you have a friend to help you can skip jacking up the wheel, put the vehicle in high gear, position yourselves on each end of the vehicle and rock the vehicle back and forth. This can take quite a while and it is quite tiring but you will notice the wheel will start to move a little farther if the process is going to succeed.
This can take quite a while and it is quite tiring but you will notice the wheel will start to move a little farther if the process is going to succeed.
+
  
 
Once the drive wheel rotates several revolutions, pull the vehicle in high gear several miles with all the plugs removed. This is probably not necessary but it gets everything lubricated up good.
 
Once the drive wheel rotates several revolutions, pull the vehicle in high gear several miles with all the plugs removed. This is probably not necessary but it gets everything lubricated up good.

Revision as of 17:51, 23 August 2009

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox