Rust
(→Metal washes, wax and grease removers) |
(→Removing surface rust from body panels) |
||
| Line 260: | Line 260: | ||
#Sand with 180 grit. | #Sand with 180 grit. | ||
#Use wax and grease remover, and then spray with epoxy primer. | #Use wax and grease remover, and then spray with epoxy primer. | ||
| − | #From there, you can apply body filler (the epoxy may need to be scuffed, read instructions) | + | #From there, you can apply body filler (the epoxy may need to be scuffed, read instructions). |
#When the filler work is done, scuff with a red scotch-brite pad. | #When the filler work is done, scuff with a red scotch-brite pad. | ||
#Then, apply two more coats of epoxy, followed by high-build primer. | #Then, apply two more coats of epoxy, followed by high-build primer. | ||
Your Privacy Choices