Body and exterior tips
(→References -- '''click the [edit] link on the right to add references ==>''') |
(→Sanding -- '''click the [edit] link on the right to edit ==>''') |
||
| Line 33: | Line 33: | ||
*To sand under rubber, lift it up by forcing a cord or coated wire under it. | *To sand under rubber, lift it up by forcing a cord or coated wire under it. | ||
*Use a different sanding block for each grit of sand paper. This will save you time, and it will ensure that you completely wear out sandpaper before removing it from the block. | *Use a different sanding block for each grit of sand paper. This will save you time, and it will ensure that you completely wear out sandpaper before removing it from the block. | ||
| + | *For sand paper, understand the different grit ratings and and their micron equivalents. For more information, see [http://www.autobodystore.com/paper_grading.htm Abrasive Grade Comparison]. | ||
==Taping and masking -- '''click the [edit] link on the right to edit ==>'''== | ==Taping and masking -- '''click the [edit] link on the right to edit ==>'''== | ||
Your Privacy Choices