Torque converter lock up control 700R4
m (still working out the kinks) |
|||
| Line 2: | Line 2: | ||
=Converter lock up wiring= | =Converter lock up wiring= | ||
| + | |||
| + | ==Basic wire diagram== | ||
| Line 18: | Line 20: | ||
[[image:700_connectors.jpg]] | [[image:700_connectors.jpg]] | ||
| − | Pressure switches: | + | ===Pressure switches===: |
Notice these are silver in color. This means they are NO = Normally Open. When pressure is applied the switch closes the internal contacts to complete the circuit. | Notice these are silver in color. This means they are NO = Normally Open. When pressure is applied the switch closes the internal contacts to complete the circuit. | ||
| Line 25: | Line 27: | ||
[[Image:700_pressure_switches.jpg]] | [[Image:700_pressure_switches.jpg]] | ||
| − | ==Solenoids== | + | ===Solenoids=== |
Solenoid designs: 1 wire and common 2 wire. Solenoid on the left has 1 red wire. this is a self grounding lock up solenoid. The 2 wire solenoid has a red wire and a black wire. Red is for 12 volts, black is for ground. | Solenoid designs: 1 wire and common 2 wire. Solenoid on the left has 1 red wire. this is a self grounding lock up solenoid. The 2 wire solenoid has a red wire and a black wire. Red is for 12 volts, black is for ground. | ||
Your Privacy Choices