Torque converter lock up control 700R4
m |
|||
| Line 20: | Line 20: | ||
[[image:700_connectors.jpg]] | [[image:700_connectors.jpg]] | ||
| − | ===Pressure switches=== | + | ===Pressure switches=== |
| − | Notice these are silver in color. This means they are NO = Normally Open. When pressure is applied the switch closes the internal contacts to complete the circuit. | + | Notice these are silver in color. This means they are NO = Normally Open. When pressure is applied the switch closes the internal contacts to complete the circuit. Both of these pressure switches are "on -off" design. Pressure turns them 'on' , no pressure they are "off" |
| + | The pressure switch with 1 pole on it is self grounding. This means the wire you hook to it is to be grounded when pressure is applied to the switch. | ||
[[Image:700_pressure_switches.jpg]] | [[Image:700_pressure_switches.jpg]] | ||
| − | ===Solenoids=== | + | ===Lock up Solenoids=== |
Solenoid designs: 1 wire and common 2 wire. Solenoid on the left has 1 red wire. this is a self grounding lock up solenoid. The 2 wire solenoid has a red wire and a black wire. Red is for 12 volts, black is for ground. | Solenoid designs: 1 wire and common 2 wire. Solenoid on the left has 1 red wire. this is a self grounding lock up solenoid. The 2 wire solenoid has a red wire and a black wire. Red is for 12 volts, black is for ground. | ||
| Line 33: | Line 34: | ||
[[image:700_solenoid_wires.jpg]] | [[image:700_solenoid_wires.jpg]] | ||
| − | Location for pressure switch on valve body for 4th gear lockup only of the converter clutch | + | Location for pressure switch on valve body for 4th gear lockup only of the converter clutch. this location has pressure when the trans is in 4th gear |
[[Image:700_v-body_switch.jpg]] | [[Image:700_v-body_switch.jpg]] | ||
Your Privacy Choices