Body and exterior tips
(→Miscellaneous -- click the [edit] link on the right to edit or add tips) |
(→Miscellaneous -- click the [edit] link on the right to edit or add tips) |
||
| Line 127: | Line 127: | ||
*Allow plenty of air circulation around your air compressor. Put it outside if possible, or point a fan at it. | *Allow plenty of air circulation around your air compressor. Put it outside if possible, or point a fan at it. | ||
*Make paper templates for easy cutting and drilling. For more information and photos, see Brian Martin's article posted on the Hotrodders Bulletin Board: [http://www.hotrodders.com/forum/tip-day-13-a-71092.html Templates for accurate cutting and drilling]. | *Make paper templates for easy cutting and drilling. For more information and photos, see Brian Martin's article posted on the Hotrodders Bulletin Board: [http://www.hotrodders.com/forum/tip-day-13-a-71092.html Templates for accurate cutting and drilling]. | ||
| − | *Before installing | + | *Before installing weld-on parts (core supports, quarter panels, rear panels, etc.), scuff the inside areas. It's easier to do this before parts are installed. |
*For doing small touchups without ending up with a huge repair area from sanding, cut sanding discs down to size. | *For doing small touchups without ending up with a huge repair area from sanding, cut sanding discs down to size. | ||
*When chemical stripping parts with heavy buildup: | *When chemical stripping parts with heavy buildup: | ||
Your Privacy Choices