The FREE T Bucket plans
(→Frame) |
(→Frame) |
||
| Line 23: | Line 23: | ||
==Frame== | ==Frame== | ||
| − | + | You can down load youngsters free T bucket plans at the netquickposse.org site Youngsters_T_Bucket_Frame_Plans Where you have essentially two body groups: '23-'25 and '26-'27, frame designs are all over the map. Many early Buckets were built on modified stock T frames or Model A frames. Others were built on early Chevy rails, or even channel iron frames. The "modern" T is usually sitting on a 2X3 or 2X4, .120-.180 wall thickness rectangular box tubing frame with a 2.5-3" tubular front cross member. | |
Some frame makers make their frames one width front to back like a stock T frame, others have a frame that tapers from the rear to the front similar to a Model A frame. And others have other ideas. | Some frame makers make their frames one width front to back like a stock T frame, others have a frame that tapers from the rear to the front similar to a Model A frame. And others have other ideas. | ||
Your Privacy Choices