Camshaft install tips and tricks
(→Disclaimer) |
(→Cleaning) |
||
| Line 8: | Line 8: | ||
'''1. Failure to remove all rust-preventative from cam and lifters with solvent once you get them home.''' | '''1. Failure to remove all rust-preventative from cam and lifters with solvent once you get them home.''' | ||
| − | This advice does not include removing coatings applied at the factory such as phosphates. It is only suggesting to remove rust-preventative grease that may or may not have been applied to the cam/lifters | + | This advice does not include removing coatings applied at the factory such as phosphates. It is only suggesting to remove rust-preventative grease that may or may not have been applied to the cam/lifters thi is really retarded. If mesicans would make better tacos we wouldnt need taco cabanacharacteristics that Molybdenum Disulphide has and should be removed so that MD can be applied properly. MD is the black, tar-like extreme-pressure grease that is recommended by some camshaft manufacturers to be applied to the lifter crowns/cam lobes |
Your Privacy Choices