Body and exterior tips

Jump to: navigation, search
(Sanding -- click the [edit] link on the right to edit or add tips)
m (Sanding -- click the [edit] link on the right to edit or add tips)
Line 41: Line 41:
 
==Sanding -- click the [edit] link on the right to edit or add tips ==
 
==Sanding -- click the [edit] link on the right to edit or add tips ==
 
*For a smaller sanding block, place a sanding block in a vice and cut it with a hacksaw.
 
*For a smaller sanding block, place a sanding block in a vice and cut it with a hacksaw.
 +
*To make a sanding block for a specific use such as when a smaller size is needed to access a confined area cut a piece of half inch thick plywood to the correct size.  Glue or screw a makeshift handle made from a small block of wood to the top of it.  Cut your sandpaper large enough to wrap it around the block and then staple it to the block.  You can do this with various sizes of dowel for areas that need a curved surface.
 
*To true a sanding block, put a piece of 180 grit sandpaper on a flat surface (plate steel, aluminum, etc.). Rub the surface of the block over the sandpaper. The flatness of the plate or flat surface will true up the surface of the block.
 
*To true a sanding block, put a piece of 180 grit sandpaper on a flat surface (plate steel, aluminum, etc.). Rub the surface of the block over the sandpaper. The flatness of the plate or flat surface will true up the surface of the block.
 
*To make a sanding block for an angle, place body filler in a bag and press it into the angle to make a mold. Or, for an actual sanding "block", place body filler on plastic wrap, press it into the angle, and press a block of wood into the back. When it hardens, it's bonded to the wood.
 
*To make a sanding block for an angle, place body filler in a bag and press it into the angle to make a mold. Or, for an actual sanding "block", place body filler on plastic wrap, press it into the angle, and press a block of wood into the back. When it hardens, it's bonded to the wood.

Revision as of 14:05, 8 August 2006

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox