Pushrod length checking tool, homemade
(Created page with '==Overview== This is a handy tool that most any enthusiast can make. It allows the valve train geometry to be set so the correct length pushrods can be ordered for a specific eng…') |
m |
||
| Line 1: | Line 1: | ||
| + | [[File:PUSH ROD LENGTH CHECKING TOOL 002.jpg|thumb||300px|alt=Homemade pushrod checking tool.|SBC pushrod length checker]] | ||
| + | <br><br><br><br><br> | ||
==Overview== | ==Overview== | ||
This is a handy tool that most any enthusiast can make. It allows the valve train geometry to be set so the correct length pushrods can be ordered for a specific engine combination. | This is a handy tool that most any enthusiast can make. It allows the valve train geometry to be set so the correct length pushrods can be ordered for a specific engine combination. | ||
| − | + | <br style="clear:both"/> | |
==Procedure== | ==Procedure== | ||
Start with a pushrod that is the correct type and nominal length for the engine and valve train that is being used. A used pushrod is fine as long as it's straight and the ends are smooth. Cut the pushrod in two and remove about 1/4" of material from one of the cut pieces. The missing length will be made up by the threaded adjuster segment that will be added later. | Start with a pushrod that is the correct type and nominal length for the engine and valve train that is being used. A used pushrod is fine as long as it's straight and the ends are smooth. Cut the pushrod in two and remove about 1/4" of material from one of the cut pieces. The missing length will be made up by the threaded adjuster segment that will be added later. | ||
| Line 11: | Line 13: | ||
The adjustable pushrod is now ready to be used for setting the valve train geometry. | The adjustable pushrod is now ready to be used for setting the valve train geometry. | ||
| − | |||
[[Category:Tools]] | [[Category:Tools]] | ||
Your Privacy Choices