Window removal and installation
Chevythunder (Talk | contribs) m (→Windsheild) |
Chevythunder (Talk | contribs) m (→Side window) |
||
| Line 23: | Line 23: | ||
Another method for the glue in type windsheilds is to use a piece of piano wire or guitar string and feed it through a hole in the seal. Then use it as a saw to cut through the windshield seal. | Another method for the glue in type windsheilds is to use a piece of piano wire or guitar string and feed it through a hole in the seal. Then use it as a saw to cut through the windshield seal. | ||
| − | ==Side window== | + | ===Side window=== |
On some vehicles the side windsheild is bolted or clipped to the track assembly. On other vehicles there are rivets holding it in place. In either case one must either remove bolts or clips or carefully drill out the rivets in order to remove a side window. Then quite often the track assembly has an upper limiter which must be removed to allow removal of the side window | On some vehicles the side windsheild is bolted or clipped to the track assembly. On other vehicles there are rivets holding it in place. In either case one must either remove bolts or clips or carefully drill out the rivets in order to remove a side window. Then quite often the track assembly has an upper limiter which must be removed to allow removal of the side window | ||
---- | ---- | ||
Your Privacy Choices