Window removal and installation
Chevythunder (Talk | contribs) (→Tips and tricks) |
Chevythunder (Talk | contribs) (→Factory glued-in glass) |
||
Line 33: | Line 33: | ||
Materials: | Materials: | ||
− | Windshield wire (best choice) | + | #Windshield wire (best choice) |
− | Stainless MIG wire (second best choice) | + | #Stainless MIG wire (second best choice) |
− | Mild steel MIG wire (third best choice) | + | #Mild steel MIG wire (third best choice) |
− | Handles made from pipe/conduit. | + | #Handles made from pipe/conduit. |
− | SHARP utility knife. | + | #SHARP utility knife. |
− | Needlenose pliers (with cutter preferable) | + | #Needlenose pliers (with cutter preferable) |
To start, cut off a length of wire about 3-4 times as long as your window is vertically, measuring from bottom to top of glass. Remove any interior trim if possible, to make things easier. | To start, cut off a length of wire about 3-4 times as long as your window is vertically, measuring from bottom to top of glass. Remove any interior trim if possible, to make things easier. |