Body and exterior tips
(→Cleanliness) |
(→Assembly and disassembly) |
||
| Line 122: | Line 122: | ||
*When disassembling small hard-to-reach parts, use grease in the socket to prevent losing fasteners. | *When disassembling small hard-to-reach parts, use grease in the socket to prevent losing fasteners. | ||
*Use caution when installing hood springs. For more information, and a diagram, see Brian Martin's article posted on the Hotrodders Bulletin Board: [http://www.hotrodders.com/forum/tip-day-28-hood-spring-installation-74269.html Hood spring installation]. | *Use caution when installing hood springs. For more information, and a diagram, see Brian Martin's article posted on the Hotrodders Bulletin Board: [http://www.hotrodders.com/forum/tip-day-28-hood-spring-installation-74269.html Hood spring installation]. | ||
| − | *For precise application of penetrating oil, put the oil in a hand spray bottle, and set the nozzle to a stream. | + | *For precise application of penetrating oil, put the oil in a hand spray bottle, and set the nozzle to a stream. This technique also prevents the release of fisheye causing aerosols into the air. |
*For drilling out hard-to-reach spot welds, certain drill attachments (like paint stirring tools) may be able to be modified to work as extensions. | *For drilling out hard-to-reach spot welds, certain drill attachments (like paint stirring tools) may be able to be modified to work as extensions. | ||
Your Privacy Choices