Adjusting solid lifters

Jump to: navigation, search
(Add text)
m (Unknown lash recommendations)
Line 41: Line 41:
  
 
===Unknown lash recommendations===
 
===Unknown lash recommendations===
Most cams have an ID engraved or stamped into them, often on the back end of the cam. The lift and duration @ 0.050" can also be measured if the equipment is available. It would be really good to know exactly what cam it is so the correct lash settings could be used. One reason for this is tight lash cams have a relatively small window for deviating from the recommended lash settings. But in the cases where the cam is unknown and proper measurements impossible, the following may help:
+
In the cases where the cam is unknown and proper measurements impossible, the following may help:
 +
 
 +
Most cams have an ID engraved or stamped into them, often on the back end of the cam. The lift and duration @ 0.050" can also be measured if the equipment is available. It would be really good to know exactly what cam it is so the correct lash settings could be used. One reason for this is tight lash cams have a relatively small window for deviating from the recommended lash settings.  
  
 
{{Warning}}<br>
 
{{Warning}}<br>

Revision as of 13:30, 25 July 2012

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox