Window removal and installation

Jump to: navigation, search
m (Installing the new window)
m (Installing the new window)
Line 86: Line 86:
 
# Place the windshield on the opening of the vehicle.  
 
# Place the windshield on the opening of the vehicle.  
 
# Go inside the vehicle. You will be pulling on the rope. Before you pull, have the helper apply mild pressure to the area were you will be pulling on the rope.
 
# Go inside the vehicle. You will be pulling on the rope. Before you pull, have the helper apply mild pressure to the area were you will be pulling on the rope.
# Pull the rope toward the center of the windsheild. The seal should slipping over the ledge and hugging it. The helper should be applying mild pressure just ahead of you.
+
# Pull the rope toward the center of the windsheild. The seal should start slipping over the ledge and hug it. The helper should be applying mild pressure just ahead of you.
 
# Go all the way around until you've pulled out the entire length of the rope.  
 
# Go all the way around until you've pulled out the entire length of the rope.  
 
# Wipe off lubricant with a dry rag, wash off the remainder with a wet rag.
 
# Wipe off lubricant with a dry rag, wash off the remainder with a wet rag.

Revision as of 20:38, 10 October 2006

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox