Removing stuck fasteners
(→Summary) |
(→Summary) |
||
| Line 12: | Line 12: | ||
With heating bear in mind axels and other important structures may loose their strength if they are heated much above 300 degrees. If you have the oil and grease starting to smoke than you are in the 300 degree range. | With heating bear in mind axels and other important structures may loose their strength if they are heated much above 300 degrees. If you have the oil and grease starting to smoke than you are in the 300 degree range. | ||
| + | |||
| + | When taking off head studs look at the base. If you see erosion into the stud at the block surface, odds are pretty good you will break the stud. | ||
==Smack it with a hammer== | ==Smack it with a hammer== | ||
Your Privacy Choices