Pistons and rings
m |
m (→SBC oil ring depth: Add link) |
||
| Line 85: | Line 85: | ||
==SBC oil ring depth== | ==SBC oil ring depth== | ||
| − | GM has used a both a shallow oil ring and a deep oil ring on SBC engines. Up to 1985 the oil ring/piston groove was 'deep' (0.195" or thereabouts). From about 1986 to the end of the L31 Vortec production, the 'shallow' rings (around 0.165") were used- but there could still be deep groove pistons and rings being used from about '95-back. A page on what to look for is '''[http | + | GM has used a both a shallow oil ring and a deep oil ring on SBC engines. Up to 1985 the oil ring/piston groove was 'deep' (0.195" or thereabouts). From about 1986 to the end of the L31 Vortec production, the 'shallow' rings (around 0.165") were used- but there could still be deep groove pistons and rings being used from about '95-back. A page on what to look for is '''[http://www.hastingsmfg.com/ServiceTips/oil_ring_groove_depths.htm Oil Ring Groove Depths]'''. |
The difference is enough between them that if a deep oil ring were to be installed on a shallow oil groove piston, that the ring would bottom out in the groove. This leaves a portion of the ring extending out past the piston and will prevent the piston from being installed. The piston can be damaged if it's forced, and if somehow the piston were to be installed in the bore with the wrong oil ring, the bore and piston could be damaged. | The difference is enough between them that if a deep oil ring were to be installed on a shallow oil groove piston, that the ring would bottom out in the groove. This leaves a portion of the ring extending out past the piston and will prevent the piston from being installed. The piston can be damaged if it's forced, and if somehow the piston were to be installed in the bore with the wrong oil ring, the bore and piston could be damaged. | ||
Your Privacy Choices