Pistons and rings
m (→KB ring gap and piston to wall clearance instructions) |
(Add link) |
||
| Line 54: | Line 54: | ||
*3.14 x [radius of the dish]² x depth of the dish x 16.4 (converts cubic inches to cc) = Volume in cc | *3.14 x [radius of the dish]² x depth of the dish x 16.4 (converts cubic inches to cc) = Volume in cc | ||
**Add 2 or 3cc for the valve reliefs if they extend beyond and/or below the dish. | **Add 2 or 3cc for the valve reliefs if they extend beyond and/or below the dish. | ||
| − | |||
=Rings= | =Rings= | ||
| + | For descriptions of the various ring types of compression rings and their location (top or second), see [http://www.federalmogul.com/korihandbook/en/section_18.htm Piston Ring Types] from Federal Mogul. | ||
==End gap== | ==End gap== | ||
Your Privacy Choices