Rust
| Line 122: | Line 122: | ||
===Various commercial rust encapsulators and rust removers (need to be sorted)=== | ===Various commercial rust encapsulators and rust removers (need to be sorted)=== | ||
POR-15 is expensive. Are there other products that are just as good, but not so pricey? | POR-15 is expensive. Are there other products that are just as good, but not so pricey? | ||
| + | |||
| + | ===Storing body panels=== | ||
| + | Use epoxy primer (AKA epoxy primer/sealer), it won't allow rust. Not the same as regular primer. | ||
| + | Wet-sand down to 400 grit, wash/dry, grind down rust to bare metal, apply body filler where needed, blow off, clean with prep-sol or similar cleaner, tape it up, and prime with epoxy primer. | ||
| + | |||
| + | Do epoxy primers need a topcoat? | ||
*[http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=16408&itemType=PRODUCT&iMainCat=373&iSubCat=374&iProductID=16408 Eastwood Rust Encapsulator] | *[http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=16408&itemType=PRODUCT&iMainCat=373&iSubCat=374&iProductID=16408 Eastwood Rust Encapsulator] | ||
| Line 227: | Line 233: | ||
*[http://hotrodders.com/forum/evapo-rust-18521.html Evapo-Rust], ''Hotrodders Bulletin Board'', June 25, 2003. | *[http://hotrodders.com/forum/evapo-rust-18521.html Evapo-Rust], ''Hotrodders Bulletin Board'', June 25, 2003. | ||
*[http://hotrodders.com/forum/small-rust-patch-anything-else-i-can-do-19405.html Small rust patch -- anything else I can do?], ''Hotrodders Bulletin Board'', July 12, 2003. | *[http://hotrodders.com/forum/small-rust-patch-anything-else-i-can-do-19405.html Small rust patch -- anything else I can do?], ''Hotrodders Bulletin Board'', July 12, 2003. | ||
| + | *[http://hotrodders.com/forum/primer-wont-rust-27650.html Primer that won't rust...], ''Hotrodders Bulletin Board'', November 10, 2003. | ||
Your Privacy Choices