Make a fiberglass fan shroud

Jump to: navigation, search

Revision as of 15:38, 11 July 2007 (edit) Jon (Talk \| contribs) (→Laminating the part) ← Older edit		Revision as of 15:39, 11 July 2007 (edit) (undo) Jon (Talk \| contribs) (→Laminating the part) Newer edit →
Line 98:		Line 98:
	*latex gloves		*latex gloves

−	~~As the scope of this~~ article ~~is primarily intended to show one way to construct a part using the foam buck method, it will assume~~ that you have a basic knowledge of laminating with fiberglass. Follow all instructions provided with your materials in regard to proper catalyzation of the resin and storage and handling of your tools and materials.	+	This article assumes that you have a basic knowledge of laminating with fiberglass. Follow all instructions provided with your materials in regard to proper catalyzation of the resin and storage and handling of your tools and materials.

Revision as of 15:39, 11 July 2007