Rust

Jump to: navigation, search

@@ Line 300: / Line 300: @@
 -------------------------
-===What to apply to sandblasted steel prior to priming, to kill unseen rust===
-Phosphoric acid, ZeroRust,.
-#Take scuff pad, wet it with phosphoric acid or product containing mainly phosphoric acid.
-#Scrub metal to a clean, bright finish. Wipe dry with paper towels, and let flash dry completely.
-#Scuff dry panel with dry scuff pad, wipe with wax and grease remover until clean and dry; when wiped with a clean towel, it comes back up clean.

Revision as of 18:31, 13 July 2007