1937-1957 Buick Oldsmobile Pontiac suspension upgrade
(→Front suspension) |
|||
| Line 85: | Line 85: | ||
[[image:58 pontiac 41 pontiac lower control arm s.jpg|frame|none|The '58 Pontiac control arms are more substantial than the '41's, but the dimensions are the same.]] | [[image:58 pontiac 41 pontiac lower control arm s.jpg|frame|none|The '58 Pontiac control arms are more substantial than the '41's, but the dimensions are the same.]] | ||
| − | The upper control arm mount is a fairly simple fabrication. If you have a | + | The upper control arm mount is a fairly simple fabrication. If you have a post 50's car, the upper mount will differ from this article. The pre-50's had the lever action shock, therefore no upper shock mount. On both of our tested conversions ('41 Pontiac and '49 Olds) we fabricated the mounts out of angle iron. We used ¼ in. 3x3 angle iron on the Pontiac, and added 2 gussets. On the Olds, we had some 3/8" 4x6 angle iron, so only added one gusset. |
[[image:49_olds_upper_mount_1.jpg|frame|none|49 Olds.]] | [[image:49_olds_upper_mount_1.jpg|frame|none|49 Olds.]] | ||
Your Privacy Choices