Valve spring tech

Jump to: navigation, search

Revision as of 13:09, 26 April 2008 (edit) Jon (Talk \| contribs) ← Older edit		Revision as of 13:10, 26 April 2008 (edit) (undo) Jon (Talk \| contribs) Newer edit →
Line 26:		Line 26:

	If the clearance is insufficient, different retainers or keepers can be used to correct it, or you can cut the spring sockets deeper in the heads. An alternative is to use longer valves.		If the clearance is insufficient, different retainers or keepers can be used to correct it, or you can cut the spring sockets deeper in the heads. An alternative is to use longer valves.
		+
		+
		+	[[Category:Engine]]

Revision as of 13:10, 26 April 2008