Troubleshooting ignition
| Line 19: | Line 19: | ||
If all the above tests are ok, pull the coil wire out of the distributor cap and hold it 1/4 “ from the block with a well insulated pair of pliers and crank the engine. If you don’t see spark the coil or the coil wire is defective. If there is spark at the coil wire then you should have it at the plugs as long as the cap and rotor are OK. | If all the above tests are ok, pull the coil wire out of the distributor cap and hold it 1/4 “ from the block with a well insulated pair of pliers and crank the engine. If you don’t see spark the coil or the coil wire is defective. If there is spark at the coil wire then you should have it at the plugs as long as the cap and rotor are OK. | ||
| + | |||
| + | [[Category:Electrical]] | ||
Your Privacy Choices