|
|
| Line 11: |
Line 11: |
| | http://electric-scooters.scootershopdirect.info scooters | | http://electric-scooters.scootershopdirect.info scooters |
| | | | |
| − | ==Cleanliness==
| + | http://motor-scooters.scootershopdirect.info yamaha motor scooters |
| − | *Use only lint-free towels for cleanup.
| + | |
| − | *Use clean cotton gloves for handling clean panels. Keep them stored clean, and wash when necessary.
| + | |
| − | *Don't leave a roll of tape on its side on any surface that's about to be painted. The adhesive on the tape will leave a residue.
| + | |
| − | *To keep your paint booth dust-free:
| + | |
| − | **Seal concrete floors with white epoxy. Concrete can break down and turn to dust.
| + | |
| − | **Put some linseed oil in a spray bottle, and mist any intake filters to catch dust.
| + | |
| − | **Clean any overhead sprinklers before and after each paint job. Or place sandwich bags over them.
| + | |
| − | **Try to eliminate vibrations from fans.
| + | |
| − | *To clean panels between compound, polish, glaze, etc., use a 50/50 mixture of water and rubbing alcohol in a spray bottle. Panels can also be cleaned with wax and grease remover.
| + | |
| − | *Don't use sprayable products in the immediate area prior to or following a paint job, for at least 24 hours. Products in the air could contaminate your paint job.
| + | |
| | | | |
| | ==Assembly and disassembly== | | ==Assembly and disassembly== |
Your Privacy Choices