How do turn signals work?
(FIELD_OTHER) |
m (Reverted edits by 91.121.28.188 (Talk); changed back to last version by Metzijndrie) |
||
| Line 127: | Line 127: | ||
#If the plugs look good, go to the lamp buckets, and measure between the socket ground and a known good ground. If it shows 12 volts, you may have an open ground wire. Replace or install a ground from each socket to a hard frame ground, following proper bonding procedures (star washers and burnishing). | #If the plugs look good, go to the lamp buckets, and measure between the socket ground and a known good ground. If it shows 12 volts, you may have an open ground wire. Replace or install a ground from each socket to a hard frame ground, following proper bonding procedures (star washers and burnishing). | ||
| − | + | ===Left or right side turn signals dead=== | |
| + | Follow the same procedure as outlined for front or rear dead above. However, apply it to the affected side. | ||
| + | |||
===All rear turn signals flashing=== | ===All rear turn signals flashing=== | ||
Your Privacy Choices