First paint job
(http://sakonze.qsh.eu/henlix-1230.html) |
m (Reverted edits by 212.62.97.23 (Talk); changed back to last version by Jon) |
||
| Line 94: | Line 94: | ||
Spraying metallic is a little different then spraying a solid color, they will mottle (have blotches of dark and light areas) and tiger stripe if sprayed incorrectly. The key to spraying metallic paint is to move the "dry spot" around. For example, spray one coat one direction, then the next coat in the direction 90 degrees to the first coat. Overlapping the coats up to 75% is another key to good metallic finishes. Remember anytime that the paint moves the metallic does as well, so if they run you will get the metallic all in one spot. With metallic always use the suggested reducers and mix the entire batch to be sprayed at the same time. I recommend this ANYTIME you paint. DO NOT play mad scientist/chemist. FOLLOW the instructions to the letter. The engineers at the paint companies spend millions on R&D, so they are already sure of the results you will get by mixing the product any given way. You, however, as an amature, are not. Do not re-invent the wheel. | Spraying metallic is a little different then spraying a solid color, they will mottle (have blotches of dark and light areas) and tiger stripe if sprayed incorrectly. The key to spraying metallic paint is to move the "dry spot" around. For example, spray one coat one direction, then the next coat in the direction 90 degrees to the first coat. Overlapping the coats up to 75% is another key to good metallic finishes. Remember anytime that the paint moves the metallic does as well, so if they run you will get the metallic all in one spot. With metallic always use the suggested reducers and mix the entire batch to be sprayed at the same time. I recommend this ANYTIME you paint. DO NOT play mad scientist/chemist. FOLLOW the instructions to the letter. The engineers at the paint companies spend millions on R&D, so they are already sure of the results you will get by mixing the product any given way. You, however, as an amature, are not. Do not re-invent the wheel. | ||
| − | + | ==Brian Martin's "Moving the Dry Spot" technique== | |
| − | + | ||
| − | + | To prevent having a drier area at each of the seams, it is advised to "move the dry spot around". This technique is especially useful for fast-drying finishes, or for paint jobs with many coats of color. However, it can also be used for primers, sealers, colors and clears, urethanes, epoxies, and enamels. For more information, see Brian Martin's article in this Hotrodders Bulletin Board forum discussion: [http://hotrodders.com/forum/tip-day-30-a-74674.html Tip of the Day #30]. | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | [ | + | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
== How to mix and spray Lacquer == | == How to mix and spray Lacquer == | ||
Your Privacy Choices