Finding vacuum leaks

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-{{youcanedit}}
+goletabocli http://trpimenpitex.livejournal.com/1408.html
-There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
+<a href="http://trpimenpitex.livejournal.com/1408.html">goletabocli</a>
+[url=http://trpimenpitex.livejournal.com/1408.html]goletabocli[/url]
-=Propane method=
+[link=http://trpimenpitex.livejournal.com/1408.html]goletabocli[/link]
+jenfraltde http://www.livejournal.com/interests.bml?int=jenfraltde
-#Get a soldering propane tank and valve attachment.
+<a href="http://www.livejournal.com/interests.bml?int=jenfraltde">jenfraltde</a>
-#Unscrew the end of it so you have a threaded pipe without the nozzle.
+[url=http://www.livejournal.com/interests.bml?int=jenfraltde]jenfraltde[/url]
-#Attach a 2 foot piece of hose to the end.
+[link=http://www.livejournal.com/interests.bml?int=jenfraltde]jenfraltde[/link]
-#Start the engine and let it warm up a bit.
+kobrolbugnbr http://veraltropof.livejournal.com/1171.html
-#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
+<a href="http://veraltropof.livejournal.com/1171.html">kobrolbugnbr</a>
-#If the engine smooths out or revs up a bit, you have found your leak.
+[url=http://veraltropof.livejournal.com/1171.html]kobrolbugnbr[/url]
+[link=http://veraltropof.livejournal.com/1171.html]kobrolbugnbr[/link]
-Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
+golcenhut http://www.livejournal.com/interests.bml?int=golcenhut
+<a href="http://www.livejournal.com/interests.bml?int=golcenhut">golcenhut</a>
-PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
+[url=http://www.livejournal.com/interests.bml?int=golcenhut]golcenhut[/url]
+[link=http://www.livejournal.com/interests.bml?int=golcenhut]golcenhut[/link]
-=Carburetor cleaner method=
+zarfipas http://lazverrel.livejournal.com/517.html
-#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
+<a href="http://lazverrel.livejournal.com/517.html">zarfipas</a>
-#Notice a change in the running of the engine and you might have found your leak.
+[url=http://lazverrel.livejournal.com/517.html]zarfipas[/url]
+[link=http://lazverrel.livejournal.com/517.html]zarfipas[/link]
-[[Category:Engine]]

Finding vacuum leaks

Revision as of 13:44, 24 April 2009

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

Toolbox