Mounting an electric fuel pump
m (Electric Fuel Pump Mount moved to Mounting an electric fuel pump: syntax) |
|||
| Line 15: | Line 15: | ||
[[Image:Mallory_fuel_pump.jpg]] | [[Image:Mallory_fuel_pump.jpg]] | ||
| − | One thing that should be noted when installing an electric fuel pump is that if you should have an accident or a roll over that the pump will keep on pumping as long as the ignition is 'ON'. Therefore, I would recommend that some sort of 'Inertia interrupter' or rollover switch, be installed to shut off the fuel pump for this very reason. For a couple bucks at the wreckers, you can usually find one a late model Mustang, located in the trunk area by removing some of the trim panels by the left tail light you'll see a small plastic box with two wires and a red reset button. Install this inline from the pump to the ignition switch and you'll have the same protection as the newer Ford cars enjoy. | + | One thing that should be noted when installing an electric fuel pump is that if you should have an accident or a roll over that the pump will keep on pumping as long as the ignition is 'ON'. Therefore, I would recommend that some sort of 'Inertia interrupter' or rollover switch, be installed to shut off the fuel pump for this very reason. For a couple bucks at the wreckers, you can usually find one a late model Mustang, located in the trunk area by removing some of the trim panels by the left [http://www.ultimateautolights.com tail light] you'll see a small plastic box with two wires and a red reset button. Install this inline from the pump to the ignition switch and you'll have the same protection as the newer Ford cars enjoy. |
[[Category:Electrical]] | [[Category:Electrical]] | ||
Your Privacy Choices