Determining top dead center

Jump to: navigation, search

@@ Line 37: / Line 37: @@
 http://store.summitracing.com/partdetail.asp?autofilter=1&part=PRO-66782&N=700+4294925139+4294925138+115&autoview=sku
-Before starting this operation, measure the outside diameter of the damper and buy a timing tape which matches the diameter of the damper. Also buy a piston stop tool. Purchasing a tool that has a hole drilled through the center of the probe will allow pressure or vacuum to escape through the hole with the piston moving up and down in the bore with the rocker arms disabled (valves on their seats) and will make the job easier.
+Before starting this operation, measure the outside diameter of the damper and refer to [[How To Make A Timing Tape]] or buy a timing tape which matches the diameter of the damper. Also buy a piston stop tool. Purchasing a tool that has a hole drilled through the center of the probe will allow pressure or vacuum to escape through the hole with the piston moving up and down in the bore with the rocker arms disabled (valves on their seats) and will make the job easier.
 http://store.summitracing.com/egnsearch.asp?Ntk=KeywordSearch&DDS=1&searchinresults=false&y=5&N=+115&Ntt=timing+tape&x=22
 http://store.summitracing.com/egnsearch.asp?Ntt=piston+stop+tool&x=30&y=5&searchinresults=false&Ntk=KeywordSearch&DDS=1&N=700+115

Revision as of 22:34, 30 May 2010